Maintenance and repair are equally critical tasks.

Maintenance is an essential protective measure against wear and tear damage to machine and equipment parts. The purpose of repairing and replacing parts is to ensure that everything is in order in manufacturing and is necessary to bring the machine and equipment to their original performance. The two work should be closely combined, prevention-oriented, prevention before it happens. Before the machine and equipment parts are damaged, timely repair and replacement ensure that the machine and equipment's long-term operation is in excellent condition.

Plastic pelletizing machine before the start of the preparatory work

1. Clean up the sanitary environment around the extruder and ancillary machinery and equipment, carefully study the safe operating procedures of the extruder, understand the function of each part of the equipment structure parts, familiar with the operation of the switches, buttons and usage.
2. Check whether the nuts on the equipment are loose. Check if the safety cover is solid. Check the installation tightness of the V-belt and adjust it appropriately. When moving the V-belt, the rotation should be more accessible, and the extruder screw rotates without jamming.
3. Check the rotational orientation of the extruder screw. Rotational direction should be toward the machine barrel mouth; if the thread of the extruder screw is right-handed, the rotational orientation of the extruder screw should be clockwise rotation to be appropriate. Check that the protective grounding of the equipment and control cabinet is tightened.

How to use the plastic pelletizing machine correctly and effectively?

The productivity and quality of the product are related to the manufacturing quality of the machine and the selection of the machine type and specification. However, whether the operator can reasonably use the machine and equipment, can pay attention to the maintenance of the machine and equipment, to increase the service life of the plastic pellet machine and all normal play extruder should have the productivity, have a relatively large relationship.

Plastic pelletizing machine to achieve proper shear application, be sure to pay attention to the following.
1. plastic pelletizing machine prohibits extraneous personnel and machine equipment operators from talking; only a single person is allowed to actually operate the electrical control panel on the button command.
2. regular testing of the insulation effect of the electrical circuit always pays attention to the warning content on the warning signs of machinery and equipment.
3. prohibit non-professionals from opening the door of the distribution cabinet of the plastic pellet mill before the power is cut off and from adjusting the CNC blade before the plastic pellet mill is completely stationary.
4. Singing the moving parts and the hopper are clogged, do not use your hands or iron sticks, but only plastic sticks to handle them carefully.
5. Be careful when touching the hot parts of the plastic pellet mill, and forbid the upper body of the worker to reach into the barrel or pick the material while the kneader is in operation.
6. Select in the work of the power should be cut off the motor circuit and timely clean up the machine memory material, material carbonization affect the next production and manufacturing.
7. Borrow plastic pellet machine equipment system failure, to terminate the operation of machinery and equipment for the first time, not to assert themselves. And notify and wait for the machine repair personnel to troubleshoot and repair or telephone guidance maintenance.
8. The strand prevents all factors from causing damage to the machine and equipment and safety accidents; strictly follow the standard operating procedures to do the actual operation and reduce the system failure or safety accidents.

Production line relative supporting facilities machinery and equipment, the production capacity of each machine and equipment to match, each machine and equipment can fully use the efficacy so that the production line machines and equipment can work in coordination. The extruder model should be selected according to the product specifications.