The operation method of the plastic granulator mainly includes a series of stages such as the installation, control, trial operation, operation method, maintenance, and repair of the machine and equipment. Please pay attention to the details of all aspects when using it.

During the extrusion process of plastic profiles, it is ideal that the cooling water temperature is between 18℃and 22℃, and the adequate water pressure should be greater than 0.2MPa. The increase of injection pressure and holding pressure will strengthen the crystallization and orientation effect, a......

The plastic profile extrusion line is mainly used for the production of plastic door and window profiles, plastic decorative panels, PVC foam profiles and other plastic products.

1. Hard plastic crusher （1）ABS, PE, PP board and other boards are crushed and recycled. （2） The rectangular feeding port is uniquely designed for the crushing of plate materials, which facilitates the crushing of long-shaped plates and improves work efficiency. Optional suction fan and storage......

The plastic crusher drives the moving knife cutter head to rotate at a high speed through the motor. During the high-speed rotation of the moving knife, it forms a relative movement trend with the fixed knife.

Packer's advanced PET bottle washing line does not need to unscrew the cap and tear off the label during the recycling and processing PET plastic bottles. After all the bottles enter the machine, they will be cut into about 1-2cm pieces.